INFORMATION

Functions:

.16E1-10/100/1000M Gigabit Ethernet interface converter used back multiplexing technology, transfer 10/100/1000M Ethernet data by using multi E1 channels. Realize convert between 1 to 16E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. also realize 10/100/1000M over 1000M fiber transmission and transmit 20/40/80/120km.this product has 3 electrical Ethernet port 10/100/1000M and 2 fiber SFP slot (comply with 1.25G SFP module),1 console port, SNMP/GUI support.

Features:

   ●   Realizing the
transparent transmission of Ethernet data via 1 to 16 E1 lines

   ●   Ethernet support
the working mode : full duplex  and  half-duplex adapt

   ●   Support 10240 bytes MTU packet.

   ●   E1 interface in
compliance with ITU-T G.703, G.704 and G.823

   ●   E1 Support 75Ω/unbalance
impedance or 120Ω/balance for order

   ●   E1’s
Support local and remote loops

   ●   Support
3 electrical Ethernet port 10/100/1000M (total bandwidth is 1000M)
and Vlan division; support 2 fiber port SFP slot(for 1.25G fiber module) and1 console port

   ●   Support
VLAN overlong data package transmission and can work with switch which support IEEE802.1Q

   ●   Support full indicators: Power status indicator, Status of
activity (E1’s),indicator LAN (Ethernet ports),optical connection indicator etc.

   ●   Support AC+DC power for redundant

   ●   Console port has below function:

   ●   Has OAM frame management ; local device could read and
manage remote device work status;

   ●   Can do VLAN division based on PORT for local device and it
wouldn’t effect the 802.1 Q VLAN division for remote device,then local and remote
can do same VLAN division;

   ●   Ethernet port can do priority set;

E1 Interface

Line Rate: 2.048Mbps±50ppm

Line Code : HDB3

Interface
Standard: ITU-T G.703

E1 Impedance: 75Ω(unbalance)
or 120Ω(balance)

Connections : 75ohm DB37 adaptor or 120-ohm twisted-pair (RJ45)

Jitter
tolerance : finer than G.742 and G.823

10/100/1000M ase-T Interface
Rate: 10/100/1000M, full/duplex auto-negotiation
Protocol: Support IEEE 802.3,IEEE 802.1Q
(VLAN)

Power supply                        

working
voltage range wide, good        

anti-disturb
and Isolation, work stable     

option
I – DC-48V,range DC-36V~DC-72C   

option
II – AC220V,range AC110V~AC240V

Power Consumption:    <=10 Watts 

Environment condition                  

Operating
temperature:  0C~+50 C        

Storage
temperature:   -20 C~+70 C

Relative
temperature:95% (uncondensed)

Typical Application: