20181125080100004

Framed E1 to 4 10/100BaseT Ethernet converter with enhanced management

E1 to ethernet converter with enhanced management,support web management and SNMP management, The E1/Ethernet converter can work with STM1/GE converter as point to multipoint application.

INFORMATION

Description

BD-FE1-4ETH-MM is Fast Ethernet over
1 or 2-port E1 protocol convertor. Ethernet traffic over E1 lines is
transferred to the packet-switched network via the unit’s Fast Ethernet ports.
The encapsulation method support HDLC/PPP-BCP(RFC3518)/GFP-F.

Typical Applications

The
device can be used in a point-to-point application or in a hub-and-spoke
topology, operating opposite Grancom’s CS1200 series, MRS46xx series and third-party
gateways.

Typical
applications include:

Ethernet
private Line/LAN services

IP DSLAM,
cellular IP, and WiMAX base station backhauling 

Interoffice
or enterprise LAN connection. 



Features:

   ●   Built-in intelligent switch fabric and
provide 4-port fast Ethernet

   ●   Support 2047 bytes frames

   ●   Up to 2K
MAC address entries                                                                      

   ●   Support IEEE802.1Q VLAN and QinQ double
tagging

   ●   Support HDLC/PPP-BCP(RFC3518)/GFP-F encapsulation

   ●   Support E1 frame or un-frame application

   ●   Provide statistics for each E1 channel

   ●   Configure via CLI/Web/SNMP(v1/v2c)

   ●   Support software and firmware upgrade

E1 Interface

Ø  Line Rate:

framing: N*64Kbps,N=0~31;
unframing: 2.048Mbps

Ø  Line Code : HDB3

Ø  Interface Standard: ITU-T
G.703

Ø  E1 Impedance: 75Ω(unbalance)
BNC connector and 120Ω(balance) RJ45 connector

Ø  Jitter
tolerance : comply with G.823,  Output jitter < 0.05UI

Ethernet
Interface

Number of
Ports: 4

Type:
10/100 Mbps, auto-negotiation, full/half duplex, flow control, MDI/MDX
crossover

Compliance:
Relevant sections of IEEE 802.3

Max Frame
Size : 2047 bytes

Connector
and Electrical Cable Type: RJ-45 , Cat.5

Line
Protection:

Built-in
1.5 KV Magnetic Isolation Protection

6KV/42Ω surge
protection

Encapsulation Protocols

HDLC
(compatible with RAD or RAISECOM’s products)

GFP-F(ITU-T
G.8040
, G.7041/Y.1303)

VCAT
(ITU-T G.7043)

LCAS
(ITU-T G.7042)

PPP/BCP(RFC
3518)

 

Internal Bridge

Number of
VLANs : Up to 16

Compliance:
Relevant sections of 802.1Q and QinQ double tagging

LAN
Table:  Up to 2K MAC addresses (learned)

 

Management Ports

Console
Port

Interface
standard: RS-232

Connector:
RJ-45

Data rate:
115.2 kbps

Power supply                        

working
voltage range wide, good        

anti-disturb
and Isolation, work stable     

option
I – DC-48V,range DC-36V~DC-72C   

option
II – AC220V,range AC165V~AC240V

Power
Consumption:    <=5 Watts

 

Environment condition                  

Operating
temperature:  0C~+50 C        

Storage
temperature:   -20 C~+70 C

Relative temperature:95%
(uncondensed)

Dimension                  

210mm(L)

140mm(W)

 40mm(H)

Related Products

Send an Inquiry

Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.