E1 to Ethernet and RS232 converter
BD-E1-ETH-RS232/M E1 to Ethernet and RS232 converter transmit Ethernet and RS232 over E1, MINI type. The g703 converter support AC or DC power.
INFORMATION
PRODUCT CHARACTERISTIC
● Have two row of LED , one indicate local status, the other indicate remote status
● Remote adjustment of velocity for the remote device is available, you can set the velocity of one side, and the velocity of the other side can auto adjust.
● Based on FPGA, easy to upgrade
● Ethernet port support AUTO- MDIX( straight line and crossed line adapt); the interface of LAN is 10/100M ,full/duplex auto-negotiation
● LAN interface support 802.1Q(VLAN) protocol
● Provide two clock mode, E1 main clock and E1 line clock
● Have three LoopBack Mode: E1 interface LoopBack(ANA)¡￠LAN interface/RS232 LoopBack(DIG)¡￠command the remote LAN interface/RS232 LoopBack (REM)
● E1 port support BNC 75-ohm dual coax and RJ45 120-ohm twisted-pair G.703 connections provided, support 75ohm/120ohm adapt;
● Support PBRS test function and it could use as a error code device;
● RS232 channel can transfer asynchronous serial data with self-adaptable baud rate of 300 to 19200;
● 220VAC & -48VDC power options and the positive and negative of DC-48V can be optional because there is the self-test circuit for the polarity inside the device
Adapting module power, voltage range can be wide, with strong ant-jamming function .
Application:
Question: Could ethernet port and RS232 port be used as the same time?
Answer: Yes,when connect PC(computer),they can be used as the same time.
Related Products
Send an Inquiry
Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.