20170112032856636

8E1 over Gigabit Ethernet Multiplexer

The 8E1 TDMoIP is based on IETF PWE3 SAToP/CESoPSN protocol IC of TDMoIP independence intellectual property rights, it supports aggregating 16 E1 over Ethernet or IP network. TDMoIP can guarantee communication priority, it can also restore the clock jitter and drift, accord with G.823/G.824, G.8261 and TDM specification.

INFORMATION

Overview:

The
8E1 TDMoIP is based on IETF PWE3 SAToP/CESoPSN
protocol IC of TDMoIP independence intellectual property rights, it
supports aggregating 16 E1 over
Ethernet or IP network. TDMoIP can guarantee communication priority, it can
also restore the clock jitter and drift, accord with G.823/G.824, G.8261 and
TDM specification. Built-in time slot assign circuit TSA. We can assign the any
E1 time slot to the new group, and provide channel associated signalling
processing capacity. Offering on WEB and SNMP in-band management, network
management infomation is abundant. TDMoIP has high transmission efficiency, low
transmission delay, and exact clock recovery precision, it can be widely used
in such as base station data back application.

The TDMoIP device can provide
1 or 2 1000M SFP fiber port and 3 or 2 1000M UTP in Ethernet side.

Features:

Device
can aggregate the 8E1 to Ethernet or IP network

E1 support framed and unframed format

E1
port is confirmed to G.703, G.704 standard

Confirmed
to IETF PWE3 specification, Support ITU-T Y.1413 and Y.1453, IETF RFC4553, RFC5086,  MEF-8 and MFA 8.0.0 protocol

Offer
1~2 fiber port and 2~3 UTP, 4 ports of Ethernet port in 1000M, it can be used as
uplink port, local data interface and network management

Ethernet ports support speed limit

Ethernet built-in 2 layer switching function, support
based on 802.1q and 802.1ad VLAN function, it also supports 802.1p protocol.

Support QOS, TACACS+

SupportL2TPv3/IPv4,UDP/IPv4,Metro Ethernet (MEF-8) and MPLS(MFA-8)  etc. protocol

Support
ARP, RTP, SNTP protocol

SYNC
E1 TDM Port supports adaptive clock recovery, the differential clock recovery,
the system clock recovery and loopback clock recovery

u  Adaptive
clock recovery precision can reach 12ppb

u  Adaptive clock traffic
impact resistant ability is strong, traffic impact on clock precision is small,
similar products optimal one order of magnitude

Each
E1 support packet loss compensation and the processing technology, and customer
can specify compensation package content.

Adopting the algorithm technology of the unique clock
frequency, stable restore frequency, small jitter and drift, accord with G.823
specification requirements

Packet loss resistance is strong, no frequency jump,
super frame synchronization protection

Web, Console, SNMP
network management, it can remote monitor and software upgrade, easy to
operation and maintenance

AC/DC adaptive power, accord with
different application. double power (option)

Parameter:

Item

parameter

Description

Ethernet Port

UTP

Type

RJ45

Number

2ports or 3ports

Auto-negociation

10/100/1000M, half duplex/full duplex work mode,
cross/straight line

Fiber Port

Type

SFP,
wave length for option, 1000base-FX

Number

2ports
or 1ports

Transmission
Distance

Default
is 20km, and 40km, 60km, 80km for option

Standard

IEEE 802.3, 802.1

802.1q VLAN, 802.1ad Q in Q, 802.1p

E1
Port

Type

RJ45

Number

8

Impedance

120Ω or 75Ω

Standard

ITU-T G.703, G.704

Management

Web

Support IE,Firfox,google chrome browser

SNMP

V1~V2C

Console

115200-8-N-1@RJ45

Mechanical Features

Dimensions

430×44.5×203mm

Weight

3kg 

Work Environment

Operation
Temperature

0℃~+50℃

Relative
Humidity    

10 %~90
% (non-condensing)

Atmospheric Press

70~106
kpa

Power

Input
Voltage

AC:100V~260V/50Hz   DC: -36V ~ -72V

Power Consumption

≤10W

Installation

19inch, rack mounting


Application:





Application story:

Related Products

Send an Inquiry

Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.