Can
Baudcom 16E1 TDM over IP work with 4E1 TDM over IP ?
BD-16E1-IP is the TDM/Packet processing
unit. It truncates E1/T1 data stream, and encapsulates the data into Ethernet
packet with or without IP headers. The packets are passed to the Ethernet
switch unit via MII interface, and are sent out through the uplink ports. Baudcom
16E1 over Ethernet multiplexer can work as point to point application. Two
units 16E1 over Ethernet device work as one pair.
BAUDCOM 16E1 TDMoIP device also can work
with 2E1/4E1/8E1 TDM over IP, they work as point to multi-point application.
point to point application
To
make 16E1 and 4E1 device work together, how to configure the them?
The belows are the steps:
1 load the management by input ip address
192.168.1.2
Account: admin password:
admin
2. Set the IP address after loading,
the
two devices IP address can not be same. Then click E1 Channel under E1
Management to set Enable. You need to enable all the E1s that you will use.
The desitination IP address is another
device (for example,4E1 TDM over IP) IP address.
In Advance button, set the 16E1 TDM over IP IP
address.
