10G Ethernet Fiber Media Converter

10G Ethernet media converter realize the conversion between SFP+ to UTP,and XFP to UTP

INFORMATION

Description:

Baudcom provides 10Gbps Ethernet media converter
between SFP+ to UTP,and XFP to UTP.No matter what kind of media applied for
10Gbps Ethernet,it used to be the fiber as the media for transmission.10G Ethernet standalone and module cards,
brings you the best and simple solution for the Ethernet conversion between
media of copper wire and fiber, with the speed of 10G.

The 10G Ethernet media converter’s module card allows you to cascade multiple BD10 2U
Rack (16 channel) chassis for managing at the same time.

With various Interface:

SFP+ to RJ45

XFP to RJ45

10G SFP+ ethernet media converter card

10G ethernet media converter SFP+ card
10G ethernet media converter XFP card

10G ethernet media converter XFP card

Application:

1.Connection
between fiber to copper 10Gbps Ethernet equipment
function as fiber-to-copper
media converter for long distance
transmission

2.Media
converter for network backbone(SAN, LAN, MAN)

3.Can
be applied in Telecommunication room, R&D laboratory, Data center, and etc.

Features：

●Support
Jumbo Frame

●Transparent
Transport and very low delay

●Support
ITUT prescribed DWDM/CWDM wavelength

●Support
DMI function for SFP+/XFP fiber module

●Support
Loopback test function

●Economic
In-band Management function

●Powerful
Network Management function（Web，SNMP，Console）

●Support
hot plugging

●Support
2U Rack (16 channel) and standalone use

●Full State Led display

●Easy
installation

●UTP
cable length detection（only RJ45 interface）

●Providing
protections against lighting and static electricity for
Ethernet network and the network main
system

10g copper to fiber diagram

Technical Specification:

Model
Module Card		BD-10G-SFP+		BD-10G-XFP
Interface	PortA	SFP+		XFP
	PortB	RJ45		RJ45
Transmission Speed		10Gbps		10Gbps
Data	Technical Indexes
Protocol	IEEE802.3an(10Gbase- T),IEEE802.3ae(10Gbase- SR/LR/ER/ZR)		Access Type	10G LAN
Transmission Distance		SFP+ module: Up to 80Km 10G base-T: 100meters Cat .6a cable
Maximum Packet Forwarding Rate		14,880,950/S
Network management information:		• Card type information • SFP+ or XFP fiber module detection • SFP+ or XFP fiber module DMI function (Temperature,Voltage,Optical power ） • Link status detector •Enable/Disabled Loopback test function • Enable/Disable PRBS Generator and checker function • Rate select （ 10Gbase-Lan or Wan ） • Remote card’s status monitor（only in pairs ）
Power requirement		Rack-mountable : AC 85 ～ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤9W
Work Environment		Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% （ non-condensing ）
Dimension		Card ：11.5mm(W)×78mm（D） Standalone:156mm（W）×128mm（D)×32mm（H）