INFORMATION

1、Overview

Dual
Gigabit Ethernet Aggregator mapping 2 port Gigabit Ethernet into 1 port 2.5G
uplink, reducing the conversion CAPEX and increasing the fiber utilization
effectively.

Aggregator
can be used in point-to-point topology as a media converter for transmitting
two Gigabit Ethernet services over one pair fiber. It also can be used as
wavelength converter for extending the system’s transmission capacity doubly in
CWDM system.

This
series has powerful management function via WEB or SNMP mode when used in 2U
system platform. It also support used standalone without any configuration.

The
device has three SFP-based ports: SFP3/2.5G is 2.5G uplink line port, SFP2 and
SFP1 are Gigabit Ethernet client ports. The Aggregator must be used in couples.

2、OUTLINE DESCRIPTION

2.1 Front panel diagram

2.2 LED Description

There are five LED At Front panel of Device：

3、Technical Specifications

Optical Specification

l   Interface Type: 1000base-X

l   Optical Connecter：SC/PC,LC/PC

l   Transmission distance: 220m~120Km

l   Multi-mode: 50/125 or 62.5/125μm

l   Single-mode: 9/125μm

Data Transfer Rate:

l   2.5Gbps for SFP3, 1.25Gbps for SFP2 and SFP1.

l   Frame Loss Rate: 0% (64 ~1518 bytes @ 100% data rate)

l   Frame rate: 100% line rate

l   maximum Frame size: up to 10000bytes

l   Latency：2500ns/pair (Connected by
short jumper line)

Support Hot-swap

Power Requirement:

l   power consumption: 4W(Max)

l   Power adaptor: 220V(110-245V)AC，50Hz

l   Voltage：+5VDC

Environmental:

l   operating temperature Range: 0 ～ 50℃

l   Storage Temperature range: -40 oC to 85 oC

l   Relative Humidity: 5% to 95% no Condensation

Physical description:

l   Dimensions: 120x80x25mm（H×W×D）

l   Weight: 0.15Kg

4、Network management function

l   All the LED status of the aggregator

l   The connection of the three port

l   DDM information of the sfp optical module

5、Typical Application:

No Aggregator（use two pair fiber）

Use Aggregator（only one pair fiber）