155M SFP Optical Module Transceiver with DDM

Request price Skype WhatsApp

INFORMATION

FEATURES:

l Up to 155Mb/s data links

l Hot-pluggable SFP footprint

l 1310nm Fabry-Perot laser transmitter

l Duplex LC connector

l Compliant with SFP MSA and SFF-8472

l Digital Diagnostic Monitoring(DDM):Internal
Calibration or External Calibration

l Very low jitter

l Automatic Gain control function

l No Rate Select input required for

Fiber
Channel 1x/2x Operation

l 20Km transmission on 9/125μm
SMF

l Metal enclosure, for lower EMI

l Single 3.3V power supply

l Low power dissipation <700mW typical

l Class 1: FDA/IEC60825-1 Laser Security

APPLICATIONS:

l Fast Ethernet

l SDH/STM-1,SONET/OC-3

l Switch to
Switch interface

l Switched
backplane applications

l Router/Server
interface

l Other optical
transmission systems

Description:

BDTRP113L1SD-20 Small Form Factor Pluggable (SFP) transceivers are
compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).The SFP transceiver
supports dual data-rate of 155MGbps and from 20km transmission distance with SMF. They simultaneously comply with the
standards IEEE Std 802.3 and IEEE 802.3u. The SFP module can be compatible with
other brand switch devices like Cisco,Huawei etc.The SFP module has the
function of AGC (Automatic Gain control).

Absolute Maximum Ratings

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Maximum Supply Voltage	Vcc	0.5		4.5	V
Storage Temperature	TS	-40		100	℃
Case Operating Temperature	TOP	-40		85	℃
Relative Humidity	RH	0		95	%	1

Electrical Characteristics (TOP = -40 to 85 ℃,
VCC = 3.00 to 3.60 Volts)

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Supply Voltage	Vcc	3.00		3.60	V
Supply Current	Icc		200	300	mA
Transmitter
Input differential impedance	Rin		100		Ω	2
Single ended data input swing	Vin,pp	250		1200	mV
Transmit Disable Voltage	VD	Vcc – 1.3		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+ 0.8	V	3
Transmit Disable Assert Time				10	us
Receiver
Single ended data output swing	Vout,pp	300	400	800	mV	4
Data output rise time	tr		100	175	ps	5
Data output fall time	tf		100	175	ps	5
LOS Fault	VLOS fault	Vcc – 0.5		VccHOST	V	6
LOS Normal	VLOS norm	Vee		Vee+0.5	V	6
Power Supply Rejection	PSR	100			mVpp	7
Deterministic Jitter Contribution	RX Δ DJ			51.7	ps	8
Total Jitter Contribution	RX Δ TJ			122.4	ps

Notes:

1. Non condensing.

2. AC coupled.

3. Or open circuit.

4. Into 100 ohm differential termination.

5. 20 – 80 %

6. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no
signal detected.

7. All transceiver specifications are compliant with a power supply
sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value applied through
the power supply filtering network shown on page 23 of the Small Form-factor
Pluggable (SFP) Transceiver MultiSource Agreement (MSA), September 14, 2000.

8. Measured with DJ-free data input signal. In actual application, output
DJ will be the sum of input DJ and DDJ.

Optical Characteristics (TOP = 0 to 70℃,
VCC = 3.00 to 3.60 Volts)

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Transmitter
Output Opt. Power	POUT	-12		-5	dBm	1
Optical Wavelength	λ	1270	1310	1360	nm	2
Spectral Width	σ			3	nm	2
Optical Modulation Amplitude	OMA	174			μW	2,3
Optical Rise/Fall Time	tr/ tf		100	160	ps	4
RIN				-120	dB/Hz
Deterministic Jitter Contribution	TX Δ DJ		20	56.5	ps	5
Total Jitter Contribution	TX Δ TJ		70	119	ps
Optical Extinction Ratio	ER	10			dB
Receiver
Average Rx Sensitivity	RSENS1	-37		-34	dBm	6, 7

Overload Power	RxMAX	-3			dBm
Optical Center Wavelength	λC	1265		1600	nm
LOS De-Assert	LOSD			-35	dBm
LOS Assert	LOSA	-45			dBm
LOS Hysteresis		0.5	3		dB