INFORMATION

1. Overview

Optical Fiber Identifier is an
important tool for optical maintenance, which is used for nondestructive fiber
identification project. Meanwhile it also has Visual Fault Locator module with
fault location function and power meter function.

Using the macro
bending technology on line for nondestructive testing, It can measure the
signal direction and power and avoid mis-operation resulting in interrupted
lines.

—Macro bending measurement. Macro bends are the use of fiber-optic
bending leak out when the weak optical signal, optical signal to detect the
direction and intensity. Does not damage optical fiber, without interrupting
communications, and direct detection of 2.5mm bare fiber, 0.9mm and 2.5mm fiber
casing tight jumper.

Build in 10 mW VFL function

* Build in OPM

* Metal gripper,no need to change the
adapter

*Low battery monitoring function

* Tone identification, Optical Fiber
Identifier can detect optical signals in the tone signal fixed load, 270Hz,
1KHz and 2KHz, to identify a specific optical fiber, can quickly find the
necessary fiber.

3.Technical
Specifications

4.User
instructions

(1) Insert the fiber to the adapter head, push the button up to lock
clamp.

(2) When optical signal passes the fiber, the LED illuminator will
indicate the traffic’s direction with intermittently audible tone and the relative core power will be also displayed in digital format.

(3) If no optical signal passes the fiber, the LED illuminator is dead
and the “LO” will be displayed in the relative core
power position.

(4) Fiber identifier can also detect the presence of 2KHz, 1KHz and 270Hz
modulated tone with the continuously audible tone.

4.4 Battery Power Indication

(1) When the LED
indicator is red, the battery power is full.

(2) When the LED
indicator is flicker, the power is too low and the instrument cannot work
properly and you have to replace the battery.