16E1 to 4Ethernet Convergence Protocol Converter
The 16E1 to 4 ethernet convergence protocol converter is multi-E1 convergency type bridge communication equipement,which bandwidth can be divided into 1~16channels according to user’s requirement.The device support point to multipoint application and point to point application.
Features
● Offer 16 channels E1 service interfaces；the 16E1 lines can be divided into different channels.
● Support ITU-T G.813 net element timing, and automatically realize the shift between serval timing resources;
● Offer a pair of clock interfaces, and can input 2M clock signal according to your needs;
● Most 4 channels 10/100Base-Tx interfaces, support GFP/LAPS encapsulation;
● Support point to multi-point application and point to point to point application;
● Support IP based WEB management；
● Support AC220V power or DC 48V power or Dual power DC48V+AC220V.
|
E1 Interface
|
WEB Network Management:
|
Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I – DC-48V,range DC-36V~DC-72C
option II – AC220V,range AC165V~AC240V
Power Consumption: <=5 Watts
Dimension
1U/19”: 483（W）′ 140（L）′ 44（H）mm
|
|
environment condition
Operating temperature: -10C~+50 C
Storage temperature: -40 C~+70 C
Relative temperature:95% (uncondensed)
|
Application:
Application 1: Point to multipoint application, 16E1 converter work with 8E1,4E1,E1 converter
Question3: if model BD-SEOP-4E1 use only 1 line E1 , then we can connect 16PCS BD-SEOP-4E1 to BD-16E1-4ETH-CON? it mean we use only 1 port E1 of model BD-SEOP-4E1 connect to model BD-16E1-4ETH-CON.
Related Products
Send an Inquiry
Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.