INFORMATION

Overview

BD-1000M-4TX-POE series is a 5 port (1FX+4TP) 10/100/1000M PoE (PSE) Ethernet Switch. The optical
fiber port can greatly extend the transmission distance limitation of normal
CAT5e UTP cable. All the four 10/100/1000Mbps UTP RJ-45 ports supports full
duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode).

Complied
with IEEE802.3at and IEEE802.3af standard, the PoE(PSE) Ethernet Switch is a
Power Sourcing Equipment (PSE) which combines data transfered over cable with
48V (typical) power supply, providing power to IEEE802.3at /IEEE802.3af powered
device (PD) over CAT5e UTP cable (cable length up to 100meters / 330feets). All
the four UTP RJ-45 ports are organized to be PoE output port and each PoE port
can output up to 60Watts (DC48V/1.2A)
power into CAT5e twisted-pair cable.

Features

2      Support one 1000Base-FX fiber optical port and four 10/100/1000Base-T UTP
RJ-45 ports

2      4 ports IEEE802.3at / IEEE802.3af PoE/PSE output

2      (high power output up to 60Watts per port)

2      Support IEEE 802.3z/AB 10/1001000Base-

2      1000Base-SX/LX/ZX standards

2      Supports IEEE 802.3x flow control

2      Supports 9216 bytes jumbo packet length

2      Built-in 1Mbits SRAM for packet buffer, with

2      4K-entry lookup table

1000Base-FX Optical Ethernet interface:

Connector: SC,FC or ST
are optional

Wavelength: 1310nm,1550nm
or 850nm(can be chosen by customer)

Optical
fiber category:

Ø       single-mode 8.3/125, 8.7/125, 9/125, 10/125um

Ø       multi-mode 50/125, 62.5/125, 100/140um

multi-
mode connection: transmitting range can reach 5 kilometers as farthest;

single-mode
connection: transmitting range can reach 100 kilometers.

10/100/1000Base-TX Ethernet Interface：

Connector:
UTP RJ45 connector

Data Rates:

10/100/1000Mbps(802.3
10Base-T/802.3u 100Base-T)

100Mbps
(100Base-FX)

Power over Ethernet Output:

Pin
Assignment and Polarity:4/5 (V+),7/8 (V-)
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery

Over current protection: auto recovery

Optical Specification :

Power supply                        

Input
voltage:AC220V, AC100V~AC240V

Input frequency: 47 Hz to 63
Hz

Dimension                  

2      158mm(L)x95mm(W)x27mm(H)

 Environment condition                  

Operating
temperature:  0C~+55 C        

Storage
temperature:   -20 C~+70 C

Relative
temperature: 95%

Ordering
Information: