64pon 128PON Chassis GPON OLT
BAUDCOM BD-OLT-3600 Series GPON OLT complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements.
INFORMATION
Overview
BAUDCOM
BD-OLT-3600 Series complies with ITU-T G.984/G.988 and meets requirements about
GPON OLT in Network Access Technical
Requirements. It fully supports CTC2.0, automatic discovery and cooperation
with ONUs of different manufacturers.
BAUDCOM BD-OLT-3600 Series supports the symmetric uplink 1.25Gbps/downlink 2.5Gbps PON
transmission rate, efficient bandwidth usage and Ethernet services, helping
carriers to provide reliable services to their users.
Its
coupling ratio ups to 1:128, and its support of different hybrid ONU networks
minimize the carrier’s investment.
BAUDCOM
BD-OLT-3600 Series, based on the edge-cutting technologies, is strong in
functions. A few of its functions such as QoS guarantee, SLA and DBA can be
easily listed out.
Specification
BAUDCOM BD-OLT-3600 Series has following advantages:
GPON: Abiding by ITU-T G.984/G.988, BAUDCOM BD-OLT-3600 Series meets relevant requirements of GPON OLT regulated in Network Access Technical Requirements and China Telecom GPON Technical Requirements CTC2.0;
- Well Interaction: automatic discovery and compatible with ONT;
- Hardware Redundancy: dual main control, dual power redundancy;
- Hot Swap: BD-OLT-3600 Series adopts the modularized designed. Each service card hot swap;
- System Capacity: BD-OLT-3600 Series supports 128 PON ports and at most 16K ONT;
- Environmental Protection: low power consumption and low operating cost.
- Bus Optical Fiber Protection: the link can be automatically switched when trouble occurs in the optical fiber;
- Power Characteristics: supports dual-AC, dual-DC and AC/DC power supply. The power supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the environment.
|
Attributes |
BD-OLT-3600-06 |
BD-OLT-3600-10 |
|
|
PON interface characteristics |
Downlink 2.5Gbps/uplink Class B+, Class C+ GPON Maximum coupling ratio: 1:128 ONU authentication |
||
|
Slots |
2 |
2 |
|
|
Backplane |
4Tbps |
4Tbps |
|
|
Switching |
960Gbps |
1920Gbps |
|
|
Max |
48 |
96 |
|
|
Max |
64 |
128 |
|
|
MAC |
128K |
||
|
Standards |
ITU-T G.984/G.988 IEEE IEEE IEEE IEEE Ethernet – |
||
|
QoS |
Backpressure IEEE IEEE 802.1p, CoS WRR, Limiting DBA and SLA |
||
|
VLAN |
Port-based QinQ and flexible QinQ |
||
|
Multicast |
L2 Multicast IGMP Snooping MLD Snooping |
||
|
Reliability |
Unidirectional Hot Optical Abnormal luminescence ONU detection such as long |
||
|
Network |
Limiting the maximum number of users on each port Port Packet Flow-based Transmission data |
||
|
Configuration |
Various Conducting Debug output |
||
|
Physical |
399.7mm×482.6mm×548mm |
533.1mm×482.6mm×548mm |
|
|
Installation: |
|||
|
Environment |
Operating environment: 0℃~45℃; 10%~85% |
||
|
Storage environment: -40℃~80℃; 5%~95% |
|||
|
Power |
Input voltage: AC90~264V, DC 36~72V Dual-power input, DC/AC power supply and hot-swap |
||
|
Model |
Description |
|
BD-OLT-3600-06 |
BD-OLT-3600-06 |
|
BD-OLT-3600-10 |
BD-OLT-3600-10 OLT chassis (standard fan board, 2 power supplies at |
|
LP66-MSU |
BD-OLT-3600 |
|
LP66-16GPON-4TE |
OLT |
|
LP66-12TE-SFP+ |
OLT GPON 10GE interface board with |
|
PWR-1200-AC |
BD-OLT-3600 OLT AC power supply |
|
PWR-1200-DC |
BD-OLT-3600 OLT DC power supply |
|
OLT-GSFP-B+ |
OLT SFP module, Class B+ standard, |
|
OLT-GSFP-C+ |
OLT SFP module, Class C+ standard, |
Related Products
Send an Inquiry
Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.