8PON GPON EPON Aggregation Extender

8PON GPON EPON Aggregation Extender, extend PON transmission distance, 8PON

Category: GPON OLT

Product Description

Overview

BD-PAE-8 is a PON aggregation extender developed by BAUDCOM. It supports
1+1 dual power backup (AC220V/DC48V mixed application). BD-PAE-8 support for
WDM cards, and supports for hot swap. Adopting NMS3000 network management
platform, BD-PAE-8 supports in-band network management, and remote management
via in-band management channel. NMS3000 has strong management capability and
user-friendly interface, rapid configuration and setup for easy network
maintenance and management.

Product parameters

Parameters

BD-PAE-8

Device
Dimensions (mm)

44
(H) * 445 (W) * 325 (D) mm

Power
supply

DC
-48 / -60V or

AC
110 ~ 220V or

DC
-48/-60V and AC 110~220V (mixed)

Installation
Method

Cabinet
installation

The
maximum number of wavelengths

Service
slots

Single-channel
maximum rate

10Gbit
/ s

Cross
particle

ODU1
ODU2

Optical
fiber interface

LC
/ UPC, SC / UPC

Transmission
fiber

G.652
G.653 G.655

Protection
mode

Device
level protection: 1 + 1 power backup
Network level protection: OTU2 SNCP protection on line side

Transmission
technology

CWDM
(G.694.2)

2.5G
/10G line rate

Electrical
cross

Fixed
rate crossing based on ODU1 / ODU2 port

Network
topology

Point
to Point

Technical
Specifications

Features

Description

Basic function

l
Supports general management
on SC card.

l
Supports configuration
management, alarm management, performance management, fault management etc.
for PAE service card.

l
Supports in-band management.

l
Supports in-band DCN.

l
Supports processing and
forwarding synchronization information internally.

l
Supports monitoring and
management on FAN and Power supply.

l
Supports 8-channel GPON /
EPON aggregation. Supports multiplexing / de-multiplexing between PON signal
and ODU2.

l
GPON mode: supports 4 x GPON
signal multiplexed into 1 x OTU2, up to 8 x GPON signal generated into 2 x
OTU2 per card; The OTU2 interfaces are independent.

l
EPON Mode : supports 8 x EPON
signal multiplexed into 1 x OTU2

OTN function

l
Supports PM, SM overhead
processing on the line-side interface, support TTI.

l
Supports scrambler and
descrambler.

l
GPON: 2.5G<->ODU1<->ODU2<->LINK

l
EPON: 1.25G<->2.5G<->ODU1<->ODU2<->LINK

l
Support FEC G709.

Line protection

l
GPON mode: supports 1+1
protection for 4 x GPON signals.

l
EPON Mode : supports 1+1
protection for 8 x EPON signals.

PON port -processing

Support 3R
function for PON port.

GPON<->ODUk mapping

l
Downlink: supports alarm
monitor for GPON OLT downstream interfaces on client side; supports ODU1
de-mapping for GPON downstream signals on ONU side.

l
Uplink: supports alarm
monitor for GPON ONU upstream interfaces on client side; supports 1.244G
<->ODU1 mapping on ONU side.

l
Supports overhead processing
for PM layer.

EPON<->ODUk mapping

l
Downlink: supports alarm
monitor for EPON OLT downstream interfaces on client side; supports ODU0
de-mapping for EPON downstream signals on ONU side.

l
Uplink: supports alarm
monitor for EPON ONU upstream interfaces on client side; supports 1.244G
<->ODU0 mapping on ONU side.

l
Supports overhead processing
for PM layer.

ODUk GCC function

l
GPON Mode: supports 2
independent GCC0.

l
EPON Mode : supports 2
independent GCC0.

PON proxy

l
GPON mode: supports GPON
range proxy, supports GPON leading compensation.

l
EPON mode: supports EPON idle
compensation.

PM and alarm monitoring

l
Supports alarm monitoring and
alarm management, such as alarm suppression, alarm reversal, alarm shielding,
and so on.

l
Supports PM and PM monitoring,
such as zero suppression performance, current performance, and historical
performance and so on.

Service card hot swap