1GE+1FE+1POTs+WIFI XPON ONU

INFORMATION

1. Overview

n BD-ONT-412W is
designed as HGU (Home Gateway Unit) in different FTTH solutions. The
carrier-class FTTH application provides different services.

n BD-ONT-412W is
based on mature and stable, cost-effective XPON technology.

n BD-ONT-412W
adopts high reliability,
easy management, configuration flexibility and good quality of service
guarantees to meet the technical performance of EPON Standard of China Telecom
CTC3.0 and GPON Standard of ITU-TG.984.X

2. Functional
Feature

n Support EPON/GPON mode and switch mode
automatically

n Support Route mode for PPPoE/DHCP/Static
IP and Bridge mode

n Support IPv4 and IPv6 dual mode

n Support 2.4G WIFI and Multiple SSID

n Support SIP Proctol for Voip Service

n Support LAN IP and DHCP Server
configuration

n Support Port Mapping and Loop-Detect

n Support Firewall function and ACL
function

n Support IGMP Snooping/Proxy multicast
feature

n Support TR069 remote configuration and
maintenance

n Specialized design for system
breakdown prevention to maintain stable system

3. Hardware
Specification

Technical item	Details
PON Interface	1 GPON BOB （Bosa on Board）
	Receiving sensitivity: ≤-28dBm
	Transmitting optical power: +1~+4dBm
	Transmission distance: 20KM
Wavelength	TX: 1310nm, RX: 1490nm
Optical Interface	SC/UPC Connector
Design Scheme	RTL9603C+RTL8192FR+LE9643 BOB(RTL8290B)
Chip Spec	CPU 950MHz,DDR2 128MB
Flash	SPI NAND Flash 128MB
LAN Interface	1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless	Compliant with IEEE802.11b/g/n,
	Operating frequency: 2.400-2.4835GHz
	support MIMO, rate up to 300Mbps,
	2T2R,2 external antenna 5dBi,
	Support: Multiple SSID
	Channel: Auto
	Modulation type: DSSS, CCK and OFDM
	Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
POTS interface	1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909
LED	1 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、 FXS
Push-Button	3,For Function of Reset, WLAN, WPS
Operating Condition	Temperature: 0℃~+50℃
Operating Condition	Humidity: 10%～90%（non-condensing）
Storing Condition	Temperature: -30℃~+60℃
Storing Condition	Humidity: 10%~90%（non-condensing）
Power Supply	DC 12V/1A
Power Consumption	≤6W
Dimension	155mm×92mm×34mm（L×W×H）
Net Weight	0.24Kg

4. Panel lights Introduction

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN2	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
FXS	On	Phone has registered to the SIP Server.
	Blink	Phone has registered and data transmission (ACT).
	Off	Phone registration is incorrect.