4GE 2POTs WIFI GPON ONT with dual antena

BD-ONT-424GWI GPON ONT is a smart HGU with integrated wireless and voice function, which can support 4GE 2POTs and 300M wifi with external dual antenna.

Request price Skype WhatsApp

INFORMATION

Overview

BAUDCOM BD-ONT-424GWI Series is a smart HGU with integrated wireless and
voice function (BD-ONT-424GWI-S built-in CATV module). It is oriented for the integrated
multi-service network in broadcast and TV industry. BAUDCOM BD-ONT-424GWI
Series is complied with the international standard IEEE802.3ah and PRC Communication
Industry Standard (YD/T 1475-2006) and China Telecom EPON Technical Requirement
CTC.

n Excellent Access Capacity

It
supports the PON transmission rate of downlink 1.25Gbps/ uplink 1.25Gbps.
Connected with BDCOM OLT, it can realize 1:64 splitting ratio. The covering
radius of the network can reach to 20km.

n Secure Service Carrying Ability

For
ensuring the secure service carrying ability of ONU, BDCOM has developed
techniques including VLAN, STP, port isolation, ACL, QoS, security filtration
and broadcast storm control.

n High Service Control Capability

It
supports DBA and Rate-Limit. It supports advanced dynamic bandwidth
distribution and accurate bandwidth limit, which enables users to share 1.25Gbps
bandwidth resource appropriately. It also supports QOS function, which
guarantees a reliable service quality and service priority.

n Rich OAM Function

It
supports the standard OAM defined by China Telecom CTC2.1/3.0, including
configuration, alarm, performance monitoring, fault isolation and security
management, and it also supports private OAM defined by BDCOM.

n Complete Interaction Capacity

It
is complied with IEEE802.3ah and relevant requirements for PRC
Community Industry Standard (YD/T 1475-2006) and China Telecom CTC2.1/3.0.

n Advanced Energy-saving Technique

It supports the “GreenTouch” architecture and
“Smart@CHIP”.

4GE+2POTs+wifi GPON ONT

Technical Parameters

Attribute		BD-ONT-424GWI	BD-ONT-424GWI-22A				BD-ONT-424GWI-S
User trial interface		4GE 2FXS
		WiFi (802.11b/g/n, external dual antenna)			WiFi (802.11b/g/n + 802.11ac, external 4 antenna)		WiFi (802.11b/g/n, external dual antenna)
		1 USB interface(USB2.0)
		N/A		N/A				1 RF(British system) Output voltage:70dbuv
Uplink interface	CATV optical interface	Type of the optical interface: SC/APC AGC range: -15~-5dbm
	PON interface	downlink 1.25Gbps / uplink 1.25Gbps The network covering radius: 20km Type of the optical interface: SC/UPC Hi-sensible optical receiver: ≤-27dBm Radiation power: 0~4dBm
		Optical interface: SC/UPC				Optical interface: SC/UPC			Optical interface: SC/APC
CATV optical receiver AGC range		N/A				N/A			-15~-5dbm
Standard		EEE802.3ah PRC Community Industry Standard (YD/T 1475-2006); IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP ITU-T Y.1291
Data forwarding		Routing, bridging, routing+bridging
DHCP		DHCP server
Multicast		IGMP-Snooping CTC defined dynamic multicast MLD-Snooping
Voice		SIP, H.248
WiFi		802.11b/g/n MIMO, max rate up to 300Mbps Multi SSID SSID encryption
QoS		Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) Head Of Line (HOL) mechanism IEEE 802.1p, CoS four priority queues on each port WR, SP and FIFO Rate limit
Reliability		Loop detect Dying-Gasp
Security		Limitation to the number of MAC addresses on the port Port protection Port storm control Against DOS attack Against port scanning
Management		CLI, Web, TR069 and TELNET Software upgrade through TFTP and WEB or TR069, OLT Local syslog or server syslog
Dimension mm (W×D×H)		230 x 140 x 34.9(excluding antenna)
Heat dissipation		Supports long-time use (For instance, 24 hours); The device running hot will not affect its performance or cause it break down.
Environment requirements		Operating environment: 0℃～45℃; 10%～90% non-condensing
Power supply		DC12V/1.5A (external adaptor power supply)
Power consumption		＜15W