16E1 TDM over IP converter Supportting CESoPSN and SAToP

BD-16E1-IP/SC is 16E1 TDM over IP converter which support 16E1/T1 over Ethernet transportation.Support CESoPSN (framed E1 mode) and SAToP(unframed E1 mode).

Request price Skype WhatsApp

INFORMATION

Product Overview:

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, the 16 E1 over Ethernet (E1 over IP) adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation 16 E1 and 3ethernet port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100M auto-sensed Ethernet ports.

State-of-the-art design provides the. high accurate clock recovery(can reach 16ppb). The 16E1 over IP device supportsframed and unframed E1 channel Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.

The 16E1 TDM over IP is also suitable for connecting to the wireless equipment to achieve fast deployment of E1/T1 services. One particular application is to build E1/T1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use Baudcom TDM over IP devices to provide legacy TDM services over wired or wireless Ethernet/IP network.support all of the traditional E1 and IP services, such as voice, data, fax, signaling and the other all kinds of communication service.

Features

1. Provide 3 FE electrical ports

2. User-friendly Web server supported for easy setup and maintenance, alarm log provided

3. Can support as framed E1 (N X 64K), or unframed E1

4. Suppport E1 or T1 standard

5. Point to point and point to multipoint supported

6. high accurate clock recovery(Two accuracy version: 100ppb, 16ppb), low jitter and wander

7. highest clock recovery version(16ppb) could be used for BTS/NodeB backhaul application

8. Low processing delay for E1 channels, high bandwidth usage efficiency

9. Resist to packet loss, with PCM frame synchronization protection

10. Support Ethernet encapsulation and UDP/IP protocol encapsulation.

11. Enough jitter buffer to resist packet delay variation (PDV)

12. Local Ethernet port throughput limiting, assuring E1 QoS

13. 120|¸ balanced E1/T1 port, RJ-45 connector, support 75|¸ unbalanced port through outside converting cable.

14. Software and hardware online upgrade

15. Power supply redundancy

Technical Specifications

Item	Description
Model	BD-16E1-IP/SC	3 FE electrical ports, 16 E1s
Interfaces	IP ports	3 FE electrical ports (can be 3FE electrical port or 1FE electrical port+2 optical port) Copper Interface: 1．10/100BASE-T, Duplex, Half duplex, auto negotiation 2．IEEE 802.3,802.1P，802.1Q 3．Connector:RJ45 (100M on UTP Category 5 cables) Fiber Interface: 1．10/100BASE-FX 2．Compliance: IEEE 802.3, 802.1P,802.1Q 3．Interface:LC (SFP) 4．Output Power≥-5dBm 5．Sensitivity≤-35dBm 6．Wavelength:1310/1550nm 7．Distance:up to 120km
Interfaces	E1 Ports	16 E1 Ports Supported Comply with G.703 Impedance: E1-120ohm or 75ohm¸ 1．System support 16 E1 channels, each interface is independent 2．Data rate: 2048kbps±50ppm 3．Code: AMI, HDB3 4．E1 interface: RJ45, Balanced, 120W. (Notes: An external BNC-RJ45 cable adapter will be supplied as an ordering option for RJ45-BNC convert option.) 5．Compliance: ITU-T G.703, G.706, G.704 6．E1 interface support long haul or short haul, by software configuration 7．Receiver: 0 ~ -43dB, Transmitter:±3V ±10% 8．Jitter compliance: ITU-T G.823 9．Clock recovery accuracy could meet 16ppb
NM port	Same as IP ports	Web server management supported
Power	Supply	Pluggable dual power supply
		2DC or 2AC or DC+AC
		-48V~-72VDC or 100~240VAC
	Consumption	15W
Working Environment	Temperature	0~ 50C
Working Environment	Relative Humidity	90% (non-condensing)
Dimension	W x H x D (mm):	440 x 44 x 231