2E1 Over Ethernet TDM over IP Multiplexer

The 2E1 over ethernet multiplexer transportate T1/E1 over 10/100M ethernet transmission.Fiver ethernet ports (4FE+1optical ethernet).The 2E1 over IP easily managed by WEB management.

Request price Skype WhatsApp

INFORMATION

Brief Introduction

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-2E1-IP-mini adopts the innovative TDM over IP technology, it transports the legacy E1 data through the existing Ethernet or IP network.

The 2 E1 over ethernet converter can support E1 or T1 protocol,can used as E1 over ethernet converter or T1 over ethernet converter.

BD-2E1-IP is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of E1 over Ethernet or IP network. The uplink ports are IEEE 802.3 compliant, 10/100BaseT auto-sensed Ethernet port.

The state-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.

Telecom and Enterprise users can save a lot of access and equipement costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use BD-2E1-IP to provide legacy TDM services over wired or wireless packet network.

Features

● Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.

● Support POE power unit embedded, support maximum 60W power over Ethernet.(optional)

● User-friendly Web server supported for easy setup and maintenance

● Point to point application and point to multipoint application are supported

● E1/T1 Port supported, E1 or T1 easy selected by Web Manager

● Uplink ports 1+1 backup supported

● Stable E1/T1 clock recovery, low jitter and wander

● Low processing delay for E1/T1 channels, high bandwidth usage efficiency

● Resist to packet loss, with PCM frame synchronization protection

● User definable encapsulation packet size for different application

● Enough jitter buffer to resist packet delay variation (PDV)

● Local Ethernet port throughput limiting, assuring E1/T1 QoS

● Local and remote E1/T1 LOS and AIS and packet loss indication for trouble-shooting and maintenance

● Support cascade concatenate for more than E1/T1 port

● Support double power or single power supplier.

● Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based,8021.1P based,MAC based and TOS based).

● Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning.

● Ethernet packet size up to 9720byte

Technical Specifications

Item	Description
Model	BD-2E1-IP	2 Uplinks(1+1), 2 E1/T1s
Interfaces	Uplink	2 Uplink Ports Comply with IEEE 802.3 Speed and duplex auto-negotiation or manual Web Manager Supported
	E1 Port	2 E1 Ports Comply with G.703 Impedance: E1-120Ω/T1-100Ω or 75Ω
Power	Supply	A	DC -48V（-36V ~ -72V）
		B	AC ~220V（100V ~ 260V）
	Consumption	≤3W
Working Environment	Temperature	0~ 50°C
	Relative Humidity	≤90% (non-condensing)
Dimension	W x H x D (mm):	185x35x 136.5

Typical Application

Application1: Point to Point Application

two units 2E1 TDM over IP work with voice device (PBX,PCM) and ethernet device (switch or router),transmitting voice and ethernet data over ethernet network.

Application2: Point to Point Application

2E1 TDM over IP work with Voice over E1 converter,transmitting voice and ethernet data over ethernet network.

Application3: Point to multipoint Application

8units 2E1 TDM over IP work with 16E1 TDM over IP or E1/4E1/8E1 TDM over IP work with 16E1 TDM over IP.

Related Techinical solution:

How to make voie over ethernet transmission? How to extend phone lines?

FAQ:

Question: Can Baudcom provide 1*RJ45 to 2*BNC male cable 50cm?
Answer: Yes, Baudcom can provide the cable, but need to pay attention to line sequence.
Question: Can your E1 TDM over IP support E1 with any signaling scheme?
Answer: yes, can support. Our device will transmit the E1 data transparently.