20141101083056749

E1 over Gigabit ethernet converter

The E1 over Gigabit ethernet converter is new generation TDM over IP equipment.E1 support framed and unframed mode.Support Web-based management and Telnet and SNMP management.support optical ethernet(SFP slot).

INFORMATION

Overview

As a cost effective solution for the
traditional telecom services migrate to the IP packet networking technology,
BD-FE1-IP-G adopts the innovative TDM over IP technology, it transports the
legacy E1 data through the existing Ethernet or IP network.

BD-FE1-IP-G is the new generation of
the TDM over IP equipment with IP circuit emulation that supports
transportation of four E1 over Ethernet or IP network. The uplink ports and user
data ports are IEEE 802.3 compliant, 10/100/1000M BaseT auto-sensed Ethernet port.

The state-of-the-art design provides
the highest availability with the accurate timing signal and data bit stream
reconstruction. Predefined system parameter profiles that according to
different application requirement; ultimately simplify the installation process
and saving the maintenance cost.

The E1 tdm
over IP converter have the performance of high 
transmission efficiency, low transmission delay, high precision clock
recovery. Support 1E1 interface and IP internet transmission of 4 1000M Ethernet interface . It is also suitable for connecting to
the wireless equipment to achieve fast deployment of E1 services. One
particular application is to build E1  links with low cost Wireless LAN bridges,
replacing much more costly microwave radios.

 

Features

Ø        1 E1 interface, E1 interface
impedance support 75Ω or 120 Ω

Ø        Support L2TPv3/IPv4, UDP/IPv4,
Metro Ethernet (MEF-8) and MPLS (MFA-8) and other agreements

Ø        E1 interface complies with
G.703, G.704 standard

Ø        Support 3*1000 Mbps Gigabit
Ethernet electrical port and one optical interface (SFP slot);

Ø        Configure via CLI/Web/SNMP(v1/v2c/v3)

Ø        Support Tag VLAN (802.1q)

Ø        Support software and firmware
upgrade

Ø        Support Ring
Protection(recovery time<20ms) and 1+1 Protection

Ø        Support NTP, SNMP, RSTP
protocol

Ø        Support TACACS+

Ø        Support Qos setting

Ø        Support for log management and
configuration file import and export

Ø        Support Web, Console, Telent,
SNMP network management, remote monitoring and software upgrades, easy to
operate and maintain

Technical Specifications

Item

Description

Model

BD-FE1-IP-G

1 E1, 3GE electrical ports and 1 GE optical port

Interfaces

Uplink

3 GE electrical ports and 1 GE optical port
Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x
Speed and duplex auto-negotiation or manual

E1 Port

1 E1 Supported

Comply with G.703 G.704

Impedance: E1-120Ω or 75Ω

Power

Supply

-48V DC or 220V (110V) AC power supply

Consumption

≤10W

Working Environment

Temperature

0~ 50°C

Relative Humidity

≤90% (non-condensing)

 

Typical Application

E1 over Gigabit ethernet converter application






E1 over Gigabit ethernet
Application1

E1 tdm over ip application


E1 over Gigabit ethernet Application2

Related Products

Send an Inquiry

Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.