STM-16 TDM over IP Multiplexer
BD-MUX04-LMXE.V8 is a card based compact SDH &IP Network integrated equipment, designed mainly as a gateway node between the core SDH/IP network and a number of remote CPE boxes.
INFORMATION
Product Overview
BD-MUX04-LMXE.V8
is a carrier-class, cost-effective, compact, high-capacity SDH &IP Network integrated
transmission platform that is designed for application in metro and access
networks to facilitate the efficient transport of traditional TDM and
increasing Ethernet data traffic for service providers. Multiple services can
be transported over SDH network and IP metro network easily via BD-MUX04-LMXE.V8.
Both SDH Cross-connection Matrix and Packet Switching Core are supported.
BD-MUX04-LMXE.V8
is a card based compact SDH &IP Network integrated equipment, designed
mainly as a gateway node between the core SDH/IP network and a number of remote
CPE boxes. It may also be used as a multi service SDH ADM node in a typical
ring or mesh network. The 3U high 19” wide chassis of the BD-MUX04-LMXE has 19
slots, with 2 slots for the 1+1 power cards, 1 slot for network management
card, 2 slots for TDM cross-connection cards, 2 slots for Packet switching
cards, and 12 slots for universal service cards.
BD-MUX04-LMXE.V8
supports multiple SDH network features as follows:
l Support 1+1 MSP, SNCP
protection
l Management channel
can be DCC/E1/VC12
l Support up to STM-16
l E1 BERT test is
embedded
l Internal clock/external
clock/line clock/clock holdover
l Ethernet service
supporting GFP encapsulation, VC12 virtual concatenation and LCAS, P VLAN, 802.1Q
VLAN and QinQ
l Large cross-connect
matrix capacity is 96*96 VC-4 VC-4 level full cross connection or 32*32 VC-4
VC-12 or VC-3 level full cross connection
l 192 remote site’s
Ethernet over 8*E1 aggregation
l 756 remote site’s
Ethernet over 1*E1 aggregation
l 192 Ethernet over SDH
aggregation
BD-MUX04-LMXE.V8
supports multiple Packet-switching network features as follows:
l 1+1 Redundancy for
Ethernet Aggregation Cards
l Support LACP, 802.1Q,
QinQ, xSTP, etc.
l Support Carrier Class
OAM (IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731)
l Support SAToP
l Support RMON
l Ethernet Aggregation
of 48 remote Ethernet CPEs.
BD-MUX04-LMXE.V8
supports the following services on different ports:
l STM-1o/STM-1e/STM-4/STM-16
l GE/FE(Optical and
Electrical)
l E1/V.35/E3/DS3
Digital subscriber line access
Hardware Architecture
Slot
description:
BD-MUX04-LMXE.V8
is composed of SDH cross-connection cards, IP packet switching cards, and tributary
service cards. There are 19 slots, including 2 slots for hot standby power
cards, 1 slot for management card, 2 slots for SDH cross-connection cards, 2
slots for IP packet switching cards, and 12 slots for tributary cards.
Features
|
Cross-connection |
High Order: 96*96 VC4s Low Order: 2016*2016 VC12s |
|
Cross-connection |
Bidirectional, |
|
Packet |
3.6Gbps |
Specifications
|
Index |
Performance Parameter |
|
Uplink Capacity |
8×STM-1o, or 4×STM-1e, or 4×STM-4, |
|
Connector |
SC/PC or FC/PC |
|
Spec. |
S-1.1, S1.2, L-1.1, L-1.2, S4.1, S4.2, |
|
Dual/Single fiber bi-directional |
|
|
Uplink Capacity |
4×GE electrical or optical |
|
Connector |
RJ-45, SC/PC(SFP Optical Module, |
|
Spec. |
1000Base-TX, 1000Base-FX |
|
PWR01A |
DC-48V Power card, 1+1 hot-standby, |
|
PWR01C |
DC -48V Power card, 1+1 |
|
PWR |
AC 220V Power card, 1+1 hot-standby, maximum power is |
|
PWR02C |
AC 220V Power card, 1+1 hot-standby, maximum power is |
|
PWR02B |
AC 110V Power card, 1+1 hot-standby, maximum power is |
|
PWR02E |
AC 110V Power card, 1+1 hot-standby, maximum power is |
|
NM80 |
Network Management Card |
|
OX01A |
Dual STM-1 aggregation optical |
|
OX01Q |
Four STM-1 aggregation optical |
|
OX01S |
Dual STM-1 aggregation optical |
|
OX04A |
Dual STM-4 aggregation optical |
|
OX16A |
Dual STM-16 aggregation optical |
|
EX01 |
Dual STM-1 aggregation electrical |
|
DX01 |
SDH Cross-Connection Matrix Card, |
|
DX02 |
DS0 |
|
PX01 |
Packet |
|
OS01 |
|
|
OS01S |
Dual STM-1 tributary optical |
|
OS02 |
2 Ethernet +Dual STM-1 tributary |
|
OS |
2 Separate Ethernet +Dual STM-1 |
|
OS03 |
1 Ethernet +Single STM-1 |
|
OS04A |
Dual STM-4 tributary optical card |
|
OP02 |
2×E1+1×V.35 PDH card |
|
OP03 |
2×E1+1×100Base-Tx PDH card |
|
OP05 |
4×E1+1×100Base-Tx PDH |
|
OP06 |
4×E1 PDH card |
|
EP01 |
24×E1 (75W or 120W RJ45, occupies 2 slots) |
|
EP |
24×E1 (120W, DB60) |
|
EP03 |
12×E1 (75W or 120W RJ45) |
|
EP |
12×E1 (120W, DB60) |
|
EP03C |
12×E1 |
|
EP02 |
1×E3/DS3 |
|
ED01 |
Dual V.35 |
|
FE01 |
4 FE over 4 VCG trunks (EoS) |
|
FE02 |
4 FX over 4 VCG trunks (EoS), SFP |
|
FE04 |
4 FE over 1~16E1 (EoE) |
|
FE05 |
4 FX over 1~16E1 (EoE), SFP |
|
FX01 |
4 FX Switching |
|
EA21 |
EOS, |
|
EA22 |
EOE, |
|
EAS22 |
Standard EOE, Ethernet aggregation, |
|
GE01 |
2 GE Opitcal/Electrical port over 2 |
|
PW04 |
4xE1 Pseudo Wire card(SAToP), with |
|
PW12 |
12xE1 Pseudo Wire card(SAToP), no E1 |
|
LA01 |
Order wire and external clock card |
|
DSL01 |
1 FE over |
|
DSL02 |
1 E1/V.35 |
|
Max E1 |
288 E1 |
|
Max E3/DS3 |
12 E3/DS3 |
|
Interface |
10/100Base-Tx or 100Base-Tx, |
|
Maximum |
48 FE ports (14 FE01 or FE02 |
|
Encapsulation |
Comply with ITU-T G.7041 (VCAT, |
|
Max Interface |
24 V.35 interfaces (framed or |
|
Uplink by STM-1 |
High order 20×20 VC-4s Low order 1260×1260 VC12s |
|
Uplink by STM-4 |
High order 32×32 VC-4s Low order 2016×2016 VC-12s |
|
Uplink by STM-16 |
High order 96×96 VC-4s Low order 2016×2016 VC-12s |
|
Uplink by GE/GX |
IP switching capacity of 3.6Gbps |
|
Interface |
10/100 |
|
Standard socket RJ11 |
|
|
3U: |
|
|
Supply |
-48V DC or dual power supply |
|
Consumption |
≤100W |
|
Temperature |
|
|
Humidity |
≤90 |
|
≤ |
|
Typical
Application
Standard
Compliance
Items
Standards and
Protocols
SDH Interface
ITU-T
G.957, G.707
E1 port
ITU-T
G.703,
G.704
Clock port
ITU-T G.823
IEEE 802
G.7041/G.704
2/G.7043 and G.8040
Related Products
Send an Inquiry
Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.