1000M Standalone Managed SFP Media Converter User Manual

   MODEL: BD-100M-OAM-SFP

 BD-1000M-OAM-SFP

1. Function

10/100M、10/100/1000M IEEE802.3ah  OAM manageable ethernet fiber media converter can
supervise the real time situation of remote manageable fiber media converter
and set the functions. With this system, the response speed of the operator is
quickened, the daily maintenance and network expenditure of the operators are
reduced, and the serving quality of them is enhanced. Pls read this manual
carefully before operation.

2.
Features

l       With high capability chipset, can
realize nonbloking transmission to make sure safty and stability

l       Support IEEE802.3x、IEEE802.3u、IEEE802.3ab、IEEE802.3z、IEEE802.3d、IEEE802.3ah、IEEE802.1d、IEEE802.1W、IEEE802.1P、IEEE802.1q、IEEE802.3x、TS1000
etc.

l       Built-in IP Web interface for remote
management and setup

l       Layer 2 Managerment Feature

l       SNMP VI/V2C moniter /private Enterprise MIB

l       Event trap and SNMP trap support

l       Managerment VLAN / 16 IEEE802.1Q
VLAN groups /  Q-in-Q Double Tag VLAN

l       Support N*64k

l       Supports Maximum frame size to 9k
bytes

l       TS-1000 OAM  / IEEE 802.3ah OAM / Loop Back Test

l       Supports Port status/Ethernet statistics on both TP and Fiber interface

3. Technical parameters

n       Ethernet
port

Rate：                       10/100M or 10/100/1000M auto-adaptive

          Duplex：           full/half
duplex auto-adaptive
  
    Protocol:                     supports IEEE802.3，IEEE802.1Q(VLAN)

Physical interface：  RJ45

AUTO-MDIX：  supports cross line and
straight line auto-adaptive   

n      Optical Interface
Wavelength：             850nm/1310nm (multi-mode)

                           1310nm/1550nm
(single mode)
   Interface:                     SC/FC
  
Receiving and sending module：       >-6dBm

Receiving sensitivity：    <-36（BER<10 ）

Transmitting range:    Multi-mode2 Km,
single-mode 40Km,
single-mode 60 Km,
single-mode 120Km  

4.  Working Condition

Voltage：                 AC180V ~ 240V；DC –48V；DC +24V

Consumption：                     ≤5W

Operating temperature:        0°C~50°C

Storing temperature:             -40°C~+70°C

Relative humidity:          95 %

No causticity and impregnant gas,
no rising dust, no strong magnetic field disturbing

5.
Installation

5.1 10/100M fiber media converter card

LED
indicator lamp:

5.2
10/100/1000M fiber
media converter card

 LED
indicator lamp:

5.3
DIP switches

Notice: Pls set the Central managable side
and Backup Central managable side before power on

(Central managable side
media converter card）

(Backup
Central managable side media converter card）

5.4
Button
introduction:

RST：Recover factory-set

Notice: Press RST for 5 seconds, media
converter will recover factory-set

IPAddress:192.168.1.2

Subnet mask:255.255.255.0

Gateway:192.168.1.1

User name:admin

Password:123

5.5
Ethernet port

Ethernet
port uses standard circuit sequence as following:

 

5.6 Optical
fiber interface

There is one optical fiber port
(SFP slot) on the panel,use can insert the different SFP module as they need.

6. Trouble
shooting

If there are problem when
installation like below, please solve them as below:

7.Web Management

7.1 Local/Romote
device status information

7.2 802.3ah OAM configuration

7.3 Q-in-Q
configuration