1GE+1FE+CATV+2WIFI+1POTs XPON ONU

BD-ONT-412WT is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access.

Request price Skype WhatsApp

INFORMATION

Overview

● BD-ONT-412WT is designed as HGU (Home
Gateway Unit) in different FTTH solutions. The carrier-class FTTH application
provides different services access.

● BD-ONT-412WT is based on mature and stable,
cost-effective XPON technology.

● BD-ONT-412WT adopts high reliability, easy
management, configuration flexibility and good quality of service guarantees to
meet the technical performance of EPON Standard of China Telecom CTC3.0 and
GPON Standard of ITU-TG.984.X

Functional Feature

● Support EPON/GPON mode and switch mode
automatically

● Support Route mode for PPPoE/IPoE/Static IP
and Bridge mode

● Support IPv4 and IPv6 Dual mode

● Support 2.4G WIFI and 2*2 MIMO

● Support SIP Proctol for Voip Service

● Support CATV interface for Video Service
and remote control by Major OLT

● Support LAN IP and DHCP Server
configuration

● Support Port Mapping and Loop-Detect

● Support Firewall function and ACL function

● Support IGMP Snooping/Proxy multicast
feature

● Support TR069 remote configuration and
maintenance

● Specialized
design for system breakdown prevention to maintain stable system

Hardware Specification

Technical item	Details
PON Interface	1 GPON BOB （Bosa on Board）
	Receiving sensitivity: ≤-28dBm
	Transmitting optical power: +1~+4dBm
	Transmission distance: 20KM
Wavelength	TX: 1310nm, RX: 1490nm
Optical Interface	SC/APC Connector
Design Scheme	RTL9602C+RTL8192FR+Si32192 BOB(RTL8290B)
Chip Spec	CPU 625MHz,DDR2 64MB
Flash	SPI Nor Flash 16MB
LAN Interface	1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless	Compliant with IEEE802.11b/g/n,
	Operating frequency: 2.400-2.4835GHz
	support MIMO, rate up to 300Mbps,
	2T2R,2 external antenna 5dBi,
	Support: Multiple SSID
	Channel: Auto
	Modulation type: DSSS, CCK and OFDM
	Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
CATV Interface	RF, WDM, optical power : +2~-15dBm
	Optical reflection loss: ≥45dB
	Optical receiving wavelength: 1550±10nm
	RF frequency range: 47~1000MHz, RF output impedance: 75Ω
	RF output level: 78dBuV
	AGC range: -13~+1dBm
	MER: ≥32dB@-15dBm
POTS interface	1 FXS, RJ11 connector
	Support: G.711/G.723/G.726/G.729 codec
	Support: T.30/T.38/G.711 Fax mode, DTMF Relay
	Line testing according to GR-909
LED	10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、FXS、 Worn、 Normal(CATV)
Push-Button	3,For Function of Reset, WLAN, WPS
Operating Condition	Temperature: 0℃~+50℃
Operating Condition	Humidity: 10%～90%（non-condensing）
Storing Condition	Temperature: -30℃~+60℃
Storing Condition	Humidity: 10%~90%（non-condensing）
Power Supply	DC 12V/1A
Power Consumption	≤6W
Dimension	180mm×107mm×28mm（L×W×H）
Net Weight	0.2Kg

Panel lights Introduction

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN2	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
FXS	On	Phone has registered to the SIP Server.
	Blink	Phone has registered and data transmission (ACT).
	Off	Phone registration is incorrect.
Worn (CATV)	On	Input optical power is higher than 3dbm or lower than -15dbm
Worn (CATV)	Off	Input optical power is between -15dbm and 3dbm
Normal (CATV)	On	Input optical power is between -15dbm and 3dbm
Normal (CATV)	Off	Input optical power is higher than 3dbm or lower than -15dbm