Hardware   Features

Business
Interface

Supply 8 PON Port

4SFP 10GE
slots for Uplink

10/100/1000M
auto-negotiable,RJ45:8pcs for Uplink

Management
Ports

Provide
10/100Base-T RJ45 out-band network management port

It can
manage the in-band network through any GE uplink port

Provide
local configuration port

Provide
1 CONSOLE port

Data
exchange

3
layer Ethernet switching, switching capacity 128Gbps, to ensure non-blocking
switching

LED Light

RUN、PW
instructions system running、power working status

PON1 to PON8 instructions 8 pcs PON port LINK and Active status

GE1 to GE8 instructions 8 pcs GE uplink’s LINK and Active status

XGE1 to XGE4 instructions 4 pcs
10GE uplink’s Link and Active status

Power
Supply

220VAC AC: 100V~240V,50/60Hz 
DC:-36V~-72V

Power
Consumption 60W

Weight

4.5 Kg

Working
Temperature

0～55℃

Dimension

300.0mm(L)* 440.0mm(W)* 44.45mm(H)

EPON Function

EPON Standard

Comply with IEEE802.3ah,YD/T 1475-200 and CTC 2.0 、2.1 and 3.0
standard

Dynamic
bandwidth allocation

(DBA)

Support
fixed bandwidth, guaranteed bandwidth, maximum bandwidth, priority, etc. SLA
parameters;

Bandwidth
granularity 64Kbps

Security
Features

Support
PON line AES and triple churing encryption;

Support
ONU MAC address binding and filtering;

VLAN

Support
4095 VLAN additions, transparent transmission, conversion and deletion;

Support
4096 VLAN additions, transparent transmission, conversion and deletion;

Support
VLAN Stacking (QinQ)

MAC address learning

Support
32K MAC addresses;

Hardware-based
wire-speed MAC address learning;

Based
on port, VLAN, link aggregation MAC restrictions;

Spanning
Tree Protocol

Support
IEEE 802.1d (STP), 802.1w (RSTP) and MSTP Spanning Tree Protocol

Multicast

Support
IGMP Snooping and IGMP Proxy, support CTC controllable multicast;

Support
IGMP v1/v2 and v3

NTP
protocol

Support NTP
protocol

Quality
of  Service(QoS)

Support 802.1p
priority queue scheduling;

Support SP, WRR or
SP + WRR scheduling algorithm;

Access
Control Lists

(ACL)

According
to the destination IP, source IP, destination MAC, source MAC, destination
protocol port number, source protocol port number, SVLAN, DSCP, TOS, Ethernet
frame type, IP precedence, IP packets carried protocol type ACL rules set;

Support
the use of the ACL rules for packet filtering;

Support
Cos ACL rule using the above settings, IP priority setting, mirroring, speed
limit and redirect the application;

Flow
Control

Support
IEEE 802.3x full-duplex flow control;

Support
port speed;

Link
Aggregation

Support
8 port aggregation group, each group supports 8 member ports

Port
Mirroring

Support
the port mirroring of uplink interfaces and PON port

Log

Support  by the alarm log output level shield;

Support
for logging output to the terminal, files, and log server

Alarm

Support
four alarm levels (severity, major, minor, and warning);

Support
6 alarm types (communication, quality of service, processing error, hardware
equipment and the environment);

Support
alarm output to the terminal, log and SNMP network management server

Performance
Statistics

Performance
statistics sampling time 1 ~ 30s;

Support
the 15 minutes performance statistics of uplink interfaces ,PON port and ONU
user port

Administration  maintenance

Support
OLT configuration save, support restore the factory settings;

Support
OLT online upgrade;

support ONU
offline service configuration and automatically configure ;

Support
ONU remote upgrade and batch upgrade;

Network
management

Support
local or remote CLI management configuration;

Support
SNMP v1/v2c network management, support band, in-band network management;

Support
the standard of broadcasting industry “EPON + EOC” SNMP MIB and
support auto-discovery protocol EoC headend (BCMP);

Support
WEB config mamagement

Open
interfaces for third-party network management;