OR20 Series Optical Receiver

INFORMATION

1、Applications

OR20 optical receiver is home optical receiver with optical fiber access
as its ultimate goal. It is suitable for FTTH (fibre to the home) network fiber
subscriber access terminals, enabling analog or digital signals to enter the
home. The machine uses low-power photodetectors, GaAs and optical AGC
technology to meet the fiber-to-the-home CATV reception needs. This device can
increase WDM and achieve triple play.

2、Performance characteristics

■ High quality aluminum profile shell with good heat dissipation.

■ RF channel full GaAs low noise amplifier circuit. The digital signal
satisfies -18dBm reception at a minimum, and the -10dBm reception of an analog
signal at a minimum.

■ With light input AGC (AGC range can be customized according to user).

■ Low-power design, using high-efficiency switching power supply to
ensure high reliability and high stability of the power supply. The overall
power consumption is less than 1W, with a light detection circuit.

■ Multi-stage lightning protection devices (TVS transient suppression
diodes), and lightning protection systems are tight to ensure safe operation of
the equipment.

■ Built-in WDM can realize single-fiber home (1490/1310/1550nm)
tri-network convergence applications.

■ Built-in optical isolator, input to achieve 1490/1310nm isolation.

■ The output gain is manually adjustable (0~18dB) and the output level is
>80dBuV.

■ SC/APC or FC/APC or custom optical connectors, metric or imperial RF
interfaces.

■ It can realize the power supply mode of output feed.

■ Can realize single or dual output

3.Technical indicators

Input optical power	0dBm~–10dBm(Analog signal）	AGC Control range	0dBm~–9dBm
Input optical power	&0dBm~–18dBm(Digital signal）	CTB(note)	≥65dB
optical reflection loss	＞45 dB	CSO(note)	≥62dB
Optical connector form	FC/APC或SC/APC or FC/PC or SC/PC	Host voltage	DC5V
Frequency Range	45~1006MHz	Adapter voltage	AC90V ~145V&AC145V ~ 265V or custom
In-band flatness	±1dB@45~1006MHz	Infeed voltage	DC5V
RF output reflection	≥16dB@ 47~550MH ; ≥14dB@1006MHz	Operating temperature	–20℃ ~+55℃
Gain adjustment range	0–18dB	power	<1W
Output level	（78~80）dBuV(AGC:@-9~+0dBm，Pin=0dBm)	Product net size	129×79×26mm
Output port number	1or 2	10 pack sizes	313×245×83mm
RF output impedance	75Ω	FCL package size (100pcs)	500×440×345mm
Carrier to Noise Ratio (Note)	≥51dB	Product net weight	0.17kg

Note: Test conditions: 59 PAL-D analog television channel signals at 550
MHz frequency range, in the range of 550 MHz to 862 MHz, under specified link
loss conditions

The digital modulation signal is transmitted within the rate range, the
level of the digital modulation signal (within the 8 MHz bandwidth) is 10 dB
lower than the carrier level of the analog signal, and the optical receiver
input optical power is 0 dBm, measuring C/N, CTB, CSO.

4、Block diagram

5、Product
manual

BD-FTTH-OR20

6、Model Description

OR20 series light collection product nomenclature: PIN tube of this
product only uses pigtail style, and can add WDM.

BD-OR20-Into the Optical Connector-RF Connector Number + Format-Photocell
Type-Wavelength-Wave Tap（Black box
is not written when order is not required）

Example: BD-OR20SA-2M-5-WSA

Explanation: This is a standard FTTH, equipment type is OR20, input
optical connector is SC/APC, RF output is 2 ports, connector form is imperial ,
photoelectric tube only receives 1550nm light, with WDM, WDM connector form is
SC/ APC.

7、Product repair

The warranty period for our company’s equipment is one year. The company
is responsible for the maintenance of the product for life. The equipment
outside the warranty period will be charged with certain materials, maintenance
and transportation costs.

The company does not assume any legal liability for any direct or
indirect damage to the device or any consequential liability arising from
improper use of the product by the user or the ability to make changes or force
majeure on the product itself.