Vdsl2+ 5-port FE+（2*2 ）11n +USB2.0 Router
The BD-VDSL-V75 5-port FE ( 2*2 )11n USB2.0 Ethernet Router is a versatile, high-speed remote router for home and the small office.
INFORMATION
1 Product Descriptions
The BD-VDSL-V75 5-port FE ( 2*2 )11n USB2.0 Ethernet
Router is a versatile, high-speed remote router for home and the small office.
2 Product Specifications and Features
2.1 H/W Features
2.1.1 Specification
|
Key Components / Connectors / Performance |
|
|
VDSL2 Chipset |
MT7510 |
|
VDSL2 LineDriver |
MT7555 |
|
WIFI Chipset |
internal |
|
Flash |
128Mbytes |
|
SDRAM |
512Mbit DDR2 |
|
Console |
Internal |
|
ITU-T |
Complied |
|
Interfaces (TR-068 compliant) |
|
|
5 |
4x 10/100Base-TX MDI/MDIX RJ-45 port 1x 10/100/1000MBase-TX MDI/MDIX RJ-45 port Compliant 1. IEEE 2. Hardware based 3. Non-blocking 4. 5. Broadcast 6. Automatic 7. Integrated |
|
WAN |
1x inner pair RJ-11 VDSL2 port
Data Rate: Downstream: Max up to100Mbps Upstream: Max up to 50Mbps Rate Adaptation: Data rate auto-negotiate in 32 kbps Performance: |
2.1.2 LED indicators
|
Location |
LED Indicative |
Color |
Status |
Description |
|
|
Power |
Green/Red |
Solid Light |
Power on |
|
Light off |
Power off |
|||
|
|
LAN1~4 |
Solid Light |
Device connected to LAN port |
|
|
Blinking |
LAN Activity present |
|||
|
Light off |
No Activity |
|||
|
|
WIFI |
Green |
Solid Light |
Wireless enable |
|
Blinking |
Date transmission |
|||
|
Light off |
Wireless disable |
|||
|
|
WPS |
Green |
Solid Light |
WPS device connected |
|
Light off |
No WPS device connected |
|||
|
Blinking |
Negotiating |
|||
|
|
USB |
Green |
Solid Light |
Usb connected |
|
Light off |
No usb connected |
|||
|
Blinking |
Date transmission |
|||
|
|
DSL |
Green |
Solid Light |
DSL good sync. |
|
Blinking |
DSL attempting sync. |
|||
|
Light off |
No carrier signal |
|||
|
|
Internet |
Solid Light |
IP connected |
|
|
Light off |
Power off |
|||
|
|
GE WAN |
Green |
Solid Light |
Device connected to WAN port |
|
Blinking |
WAN Activity present |
|||
|
Light off |
No Activity |
2.2 S/W Features
|
Feature Item |
Feature |
Detailed Description |
|
VDSL
|
G.993.2
|
Vdsl profiles
|
|
US0 |
||
|
Diagnostics
|
||
|
Dying GASP
|
||
|
PhyR
|
||
|
Virtual Noise
|
||
|
Both Annex A and Annex B
|
Both Annex A and Annex B band
|
|
|
WIFI Compliance |
IEEE 802.11b/g/n |
|
|
Support 2×2 antennas |
|
|
|
Support 2-stream spatial multiplexing up to 270Mbps |
(Can upgrade to |
|
|
Support MCS 0-15 and MCS 32 modulation and coding rates |
|
|
|
Support |
|
|
|
Support for STBC in both TX and RX |
|
|
|
Network Protocols and Features |
RFC2684 VC-MUX, LLC/SNAP encapsulations for bridged or routed packet |
VC-MUX for any |
|
RFC2364 PPP over
|
RFC2364 LLC/NLPID
|
|
|
AAL5 |
encapsulation for PPPoA |
|
|
802.1q/1p VLAN over RFC2684 Bridge encapsulation |
802.1q header insertion toward WAN and de-insertion toward LAN over RFC2684 bridge mode over AAL5. Supports multiple VLANs on multiple PVCs and mapping VLANs, PVCs and physical LAN port to multiple bridges. |
|
|
PPPoA |
Support AUTO, PAP, CHAP, MS- CHAP authentication Added static IP address assignment. |
|
|
PPPoE |
Support AUTO, PAP, CHAP, MS- CHAP authentication Added static IP address assignment. |
|
|
Multiple PPPoE sessions on single PVC |
Allows multiple PPPoE sessions on one PVC. |
|
|
PPPoE pass-through |
Supports concurrent PPPoE clients inside the modem and PPPoE clients on the LAN devices |
|
|
PPPoE – filtering of non-PPPoE packets between WAN and LAN |
Previously only filtered non- PPPoE packet from LAN to WAN, now works in both directions. |
|
|
Auto-clean-up remote staled PPP sessions at BRAS |
Clean up staled PPP sessions (PPPoE and PPPoA) at ISP BRAS after ADSL link goes down then up or after modem reboots, if scratch pad is enabled on top boot flash. |
|
|
IPoA |
|
|
|
MER (a.k.a IP over Ethernet over AAL5) |
|
|
|
WAN to WAN traffic blocking in bridge mode |
|
|
|
Second IP address on LAN interface |
Only public IP address and no DHCP on second IP address. |
|
|
ARP |
|
|
|
DNS relay |
|
|
|
DNS server fallback in DNS Relay |
Launch dnsprobe process when both primary and secondary DNS’s are assigned. Probe primary DNS status and fallback to secondary DNS. When primary DNS is up again, switch back to primary DNS. |
|
|
DHCP server |
|
|
|
DHCP client |
|
|
|
DHCP Relay |
DHCP relay agent for IPoA and MER type of WAN connections. |
|
|
NAPT |
|
|
|
IGMP Proxy |
IGMP v1/v2 |
|
|
IGMP Snooping |
IGMPv1/v2 snooping in bridge mode. Added blocking mode. |
|
|
RIP v1/v2 |
Enable RIP over multiple WAN interfaces |
|
|
Dynamic DNS |
Automatic update WAN IP address when it is changed to dyndns.org and/or TZO DDNS operator. |
|
|
LAN port to VC mapping |
Supports traffic mapping between a group of LAN port to a PVC. |
|
|
Ethernet as WAN interface. |
Added Ethernet as WAN interface to support PPPoE or IP over Ethernet. |
|
|
Multiple Protocol VLAN Mux |
Support multiple protocols on single PVC using VLAN ID |
|
|
Multiple Service PVC |
Support PPPoE, Bridge, and MER services over a single PVC |
|
|
Firewall |
Stateful |
SPI Fire Wal |
|
Denial of Service attack |
Passed DOS attacks: ARP Attack, Ping Attack, Ping of Death, Land, SYNC, Smurf, Unreachable,Tear Drop |
|
|
TCP/IP/Port/interface filtering rules |
Support both incoming and outgoing filtering. |
|
|
MAC Layer Filtering |
Added IGMP in protocol menu. Filter MAC frames based on protocol type, source/destination MAC address, direction |
|
|
Day-time Parental Control |
|
|
|
VPN |
IPsec VPN(optional) |
Support VPN connection to remote VPN gateway. |
|
QoS |
IP/Bridge/802.1p QoS |
Supported both routed and bridged mode PVCs for packet level QoS: classification rules, priority queuing using queues, IP TOS/Precedence, 802.1p marking. Added DiffServ DSCP marking and src/dest MAC addresses classification. |
|
Configuration and Management |
Web based GUI |
|
|
Embedded web server |
|
|
|
Download image via HTTP or tftp client |
|
|
|
Download image via FTP server |
|
|
|
Download image via TFTP server |
|
|
|
Command Line Interface via serial port, telnet, or ssh |
added dumpcfg, sntp commands. Added option to tftp, adsl, wan, ppp commands. Upgrade sshd to version |
|
|
Menu-driven CLI via serial port or telnet |
Added dump configuration. |
|
|
Universal Plug and Play (UPnP) Internet Gateway Device (IGDv1.0) |
V Added support for ADSL IGD. Enable/disable UPnP without reboot. |
|
|
SNMP v1/v |
|
|
|
SNMP MIBs: rfc2662 ADSL line MIB, rfc2515 ATM MIB, MIB-II |
Support GET only except GET/SET for system MIB and ifAdminStatus in ifTable. |
|
|
Date/time update from SNTP Internet Time Server |
Automatic synchronize date and time with Internet Time Servers and Display Date/time in device info and syslog. Added SNTP command. |
|
|
Daylight saving zone |
|
|
|
TR-69(optional) |
Support 273 parameters,digest/certificate/SSL security. Support proprietary parameters implementation without tr framework sources |
|
|
Code support |
G.711( A law & u Law), G.723.1, G.726, G.729,etc
|
|
|
Silence suppression |
Support Silence suppression |
3 Mechanic & ID Design
3.1 Outlook
(TBD)
3.2 Case
(TBD)
3.3 Physical
& Environment
3.3.1 Power
– Input: 100–240VAC,
50/60Hz (Region dependent)
– Output: 12V
DC,1.5A (Switch)
– Dying Gasp: Supported
– Power Switch: Push button
supported
– Reset Button: Reset to
factory default by pushing button
– Wifi Buttom: Push button supported
– WPS Button: Push button supporter
3.3.2 Operation Temperature
–
3.3.3 Storage Temperature
–
3.3.4 Humidity
– 5% ~ 95%
non-condensing
4 Certification
Requirements
4.1 EMC/RF Certificates and Test Reports
|
Request |
EMI/EMC Test |
Class A |
Class B |
Region & requirements |
|
|
CE Report |
|
|
EU |
|
|
FCC report(FCC CFR 47 Part 15 B) |
|
|
US |
|
|
IC report(ICES-003) |
|
|
|
|
|
IC report(ICES-006) |
|
|
|
|
|
C-Tick Report(AS/NZS CISPR 22) |
|
|
New Zealand & Australia |
|
|
VCCI Report(CISPR 22) |
|
|
|
|
|
MIC report |
|
|
|
|
|
Anatel |
|
|
|
|
|
BSMI |
|
|
|
|
|
CCC |
|
|
|
|
|
Other’s |
|
|
|
4.2 Telecom Certificates and Test Reports
|
Request |
Telecom. Test |
Telecom (RJ-11 Port |
Region |
|
|
CE Report |
|
European union(EU) |
|
|
FCC Report (FCC CFR 47, Part 68)
|
|
US /FCC ID(3P7XXXXXX..) |
|
|
IC Report (CS-03) |
|
ID (4216AXXXX…) |
|
|
A-Tick Report |
|
New Zealand & Australia |
|
|
NCC(PSTN01) |
|
|
|
|
Anatel |
|
|
|
|
BSMI |
|
|
|
|
CCC |
|
|
|
|
Other’s |
|
|
4.3 Safety Certificates and Test Reports
|
Request |
Certifications |
Standards |
Region |
|
|
CE LVD report |
EN60950-1: 2001 |
European Union |
|
|
UL/cUL Listed Mark |
UL/CSA 60950-1 |
US / |
|
|
CSA International Mark |
IEC60950-1 UL60950-1 CSA60950-1 EN 60950-1 |
World US European Union |
|
|
CB Report |
IEC60950-1: 2001 EN60950-1 :2001 |
World European Union |
|
|
Other’s requirements |
|
|
4.4 Reliability Test Reports
|
No. |
Requ ired |
Test Items |
Refer to |
|
1. |
|
MTBF of Prediction Report |
Bell-core TR-332, Issue 6 or |
|
2. |
|
MTBF of Endurance test Report |
SPEC |
|
3. |
|
MTBF of Demonstration test Report |
SPEC |
|
4. |
|
Free Fall(Drop)Test Report |
IEC |
|
5. |
|
Random Vibration Test Report |
IEC 60068-2-34: 1973 |
|
6. |
|
Storage Test Report |
IEC 60068-2-48 |
|
7. |
|
Operation Cold(low temperature) Test |
IEC 6 |
|
8. |
|
Operation Dry Heat(High temperature) |
IEC 6 |
|
9. |
|
Operation Temperature Cycles Test |
IEC 6 |
|
10. |
|
Thermal Shock Test |
IEC 6 |
|
11. |
|
Damp Heat Steady State test |
IEC 60068-2-78 |
|
12. |
|
Thermal Profile Test |
D-Link SPEC |
|
13. |
|
ESD Simulation Test report |
IEC 6 Air Discharge: Contact |
|
14. |
|
High / Low Temperature Start Test |
SPEC |
|
15. |
|
Parts |
SPEC |
|
16. |
|
Acoustic Noise test |
EN 27779 & ISO 7779 |
4.5 RoHS Requirement
4.5.1 Level A
of Substance limitation requirements table (for appliances & accessories)
|
Level |
No. |
Description |
Limitation/ ppm |
A
|
A1 |
Cadmium/ |
80 |
|
A2 |
Hexavalent |
800 |
|
|
A3 |
Lead/ |
800 |
|
|
A4 |
Mercury/ |
800 |
|
|
A5 |
Polybrominated |
800 |
|
|
A6 |
Polybrominated |
800 |
4.5.2 Level A
of Substance limitation requirements table (for Packing)
|
Level |
No. |
Description |
Limitation/ ppm |
|
A |
A1 ~ A4 |
Cadmium Chromium VI, Lead and Mercury compounds |
100 |
Related Products
Send an Inquiry
Tell us your required quantity, destination country, and any technical requirements. We'll reply within 12 hours.